Gold Extraction Process with Pre-Ox Sample and Aachen Assisted Leaching (AAL) using Running Aachen

Dedi Pangestu, Tri Wahyuningsih

Abstract


The Center for Mineral and Coal Testing is an institution that works in the field of research services on mining and mineral processing. In the mineral processing research currently being carried out there is a research project related to increasing the efficiency of the leaching process using the Aachen Reactor. The samples used in this research were refractory gold samples. The problem of reducing the effectiveness of gold leaching is that there are minerals that are still included in the associated minerals, therefore a pre-treatment process is needed to remove these associated minerals. The Aachen reactor will help increase the efficiency of the leaching process by increasing Dissolve Oxygen levels to 30 ppm. In this study, two samples were used for comparison, namely the Pre-Ox sample and the Aachen Assisted Leaching (AAL) sample.


Keywords


Minerals; Aachen; Leaching, Extractive Metallurgy

Full Text:

PDF

References


Fajri, Dwi Latifatul. (2022). 6 Daerah Penghasil Tambang Emas Terbesar di Indonesia

Jimansyah. (2016). Ekstraksi Logam Emas dan Perak dari Larutan Bijih dengan Sistem Penyerapan Menggunaan Karbon Aktif Batubara Sub-Bituminus (Coalite). Universitas Islam Bandung: Jawa Barat

Maelgwyn, (2009). Imhoflot Pneumatic Flotation Technology

Nastiti, Hani. (2022). Pengertian Emas, Jenis, Manfaat, dan Cara Membedakan Emas Asli.

Prokhorov, Konstantin. (2018). Influence Of Agitation Leaching Conditions to The Behavior Of Gold in Solution. Mining Institute of Far Branch of Russin Academy Of Sciences: Russia

P. Lotz, J. van der Merwe dkk. (2015) Aachen ReactorsTM, a proven system to realize hidden economic potentials, The Southern African Institute of Mining and Metallurgy Word Gold Conference 2015.

Reza, Muhammad. (2022). Kajian Teknis Pengolahan Emas Menggunakan Metode Heap Leaching di PT DEF Kecamatan Simpenan, Kabupaten Sukabumi, Provinsi Jawa Barat. Bandung Conference Series Mining Engineering: Jawa Barat

Riandini, Ananda. (2023) ANALISISI KESTABILAN HEAP LEACH PAD BERDASARKAN JUMLAH MATERIAL YANG DAPAT DITAMPUNG PADA PROJEK TAMBANG XX, JAWA BARAT. Universitas Islam Negeri Syarif Hidayatullah: Jakarta

Rindu, Maharani. (20170. Perbandingan Hasil Logam Emas pada Pengolahan Bijih Emas dengan Metode Sianida (Heap Leaching) Berdasarkan Perbedaan Ukuran Butir Umpan. UPN “Veteran” Yogyakarta

Sabara, Zakir, dkk. (2017). EKSTRAKSI EMAS DARI BIJI EMAS DENGAN SIANIDA DAN OKSIGEN DENGAN METODE EKSTRAKSI PADAT-CAIR. Journal Of Chemical Process Engineering. Vol. 02, No. 02. Universitas Muslim Indonesia: Makassar

Sarempa, apriani dkk. (2017) OPTIMASI RECOVERY EMAS DAN PERAK DENGAN SIANIDASI PADA DEPOSIT BIJIH EMAS KADAR RENDAH DI PT. NUSA HALMAHERA MINERAL DAERAH GOSOWONG KABUPATEN HALMAHERA UTARA, PROVINSI MALUKU UTARA

Suci, Ferlia. (2016). Efektifitas Larutan Leaching Tiourea dan Tiosulfat dengan Bantuan Oksidator dalam Proses Ekstraksi Emas (Au).Universitas Jember: Jawa Timur

Sudesno, Nurhakim. (2019). Peningkatan Recovery Emas di Carbon in Leach Plant PT. Antam tbk. Unit Bisnis Pertambangan Emas Pongkor, Jawa Barat (Studi Kasus Kadar Bijih 3.5 – 4.5 gp di Plant 1). PROSDIDING TPT XXVIII PERHAPI 2019

Sulistiyono, Eko. (2016). Potensi Pemanfaatan Limbah Pengolahan Emas Proses Heap Leaching. Semninar Nasional Sains dan Teknologi 2016. Universitas Muhammadiyah Jakarta: Jakarta

S. Orgul. U. Atalay. (2002). Reaction Chemistry Of Gold Leaching in Thiourea Solution For A Turkish Gold Ore. Hydrometallurgy, Vol. 67. No. 71-77. Elsevier

Tangkuman, Herling. (2008). Pengaruh Konsentrasi Sianida terhadap Produksi Emas. Universitas Sam Ratulangi: Sulawesi Utara

Tang, Yuan. (2020). Enhancement Of Gold Agitation Leaching by HPGR Comminution Via Microstructural Modification Of Gold Ore Particles. Vol 159. Minerals Engineering. Elsevier




DOI: https://doi.org/10.31315/jmept.v4i2.11252

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 DEDI PANGESTU, Dedi Pangestu

Journal of Metallurgical Engineering and Processing Technology indexed by:

 




Journal of Metallurgical Engineering and Processing Technology (JMEPT)


Department of Metallurgical Engineering, UPN "Veteran" Yogyakarta
Metallurgical Research and Development Centre (MRDC)-UPNVY
Gd. Urip Sumohardjo Lt. 2
Jl. Babarsari No. 2, Tambakbayan, Yogyakarta 55281

View My Stats