Behavior of welded joints on the roof truss of KOJK Office using LISA V.8 FEA
Abstract
Welded joints play a crucial role in the structural integrity of buildings, particularly in supporting heavy loads and resisting various forces such as wind, seismic, and gravitational loads. This research was carried out by identifying the stresses that occur in the welded joints of the truss trusses of the roof of the KOJK Central Java building, with initial analysis conditions of rigid and stiff connections, and second conditions with conditions that occur according to field findings, where the joints are non-standard and there are several holes due to welding. not perfect. Modeling analysis uses Finite Element Analisys software, namely LISA V.8 FEA (License), to obtain the stress behavior that occurs in the roof truss elements of KOJK Central Java. From the results of analysis and modeling by making two conditions, namely the condition of welding joints according to standards and welding joints under field conditions. The stress ratio at the weld joint is 1.351 and the stress ratio at the truss pull rod is 1.054.
Keywords
Full Text:
PDFReferences
ASTM International. 2016. ASTM AISC 360/AISC N690 – Specification for Structural Steel Buildings. Retrieved From. ASTM International.
Bryson, L. S., and J. R. Giraldo. 2020. “Analysis of Case Study Presenting Ground Anchor Load-Transfer Response in Shale Stratum.” Canadian Geotechnical Journal. doi: 10.1139/cgj-2018-0326.
Efendi, A. W. 2020. “Modeling of Soil Subsidence in IKN Using Numerical Analysis of the Finite Element Method LISA V. 8.”
Efendi, A. W. 2022a. “Behavior Analysis of Building Structures After a Fire with FEA LISA V. 8.” Kurva S: Jurnal Keilmuan Dan Aplikasi Teknik ….
Efendi, A. W. 2022b. “Structural Design Tuak River Pedestrian Suspension Bridge Anchor Block Type Rigid Symmetric with LISA.” Elektriese: Jurnal Sains Dan Teknologi Elektro.
Efendi, A. W. 2023a. “Behavior of Railroad Bridge Girders Due to Brake Loads with LISA V. 8 FEA.” … Conference on Railway and Transportation (ICORT ….
Efendi, A. W. 2023b. “Desain Kandang Sperma Ideal Untuk Sapi Menggunakan LISA V. 8 FEA.” Jurnal Sintesis: Penelitian Sains, Terapan Dan ….
Efendi, A. W. 2023c. “PEMODELAN PENURUNAN TANAH DI IBU KOTA NEGARA NUSANTARA MENGGUNAKAN ANALISIS NUMERIK METODE ELEMEN HINGGA LISA V. 8.” PADURAKSA: Jurnal Teknik Sipil ….
Efendi, A. W. 2023d. “Simulation of Fire Exposure Behavior to Building Structural Elements Using LISA FEA V. 8.” International Journal of Advanced Science and ….
Efendi, A. W., and C. Weijia. 2023. “Buffer Stops Behavior Due to Rail Impact Loads with LISA FEA.” Journal of Railway Transportation and Technology.
Efendi, Aco Wahyudi. 2023. “Stress Behavior of Rampdoor Jetty Bumi Harapan Port Sepaku-IKN Using LISA FEA V.8.” Jurnal Rekayasa Mesin Dan Inovasi Teknologi(Jurnal REMIT) 4(2):274–79.
Efendi, Aco Wahyudi, and Novia Safitri. n.d. “Numerical Modeling the Effect of Extreme Temperatures on Rooms with Mortar Foam Walls Using LISA V.8 FEA.” CAFEO 41 Engineering Conference. 41:28–36.
Efendi, I. A. W. 2022. “Repair Analysis of Pinang Bridge Oprit Subsidence with Mortar Form Using LISA FEA V. 8.” Journal of Research and Inovation in Civil Engineering ….
Elsanadedy, H. M., Y. A. Al-Salloum, M. A. Alrubaidi, and ... 2021. “Finite Element Analysis for Progressive Collapse Potential of Precast Concrete Beam-to-Column Connections Strengthened with Steel Plates.” Journal of Building ….
Ertas, A. H., and M. Akbulut. 2021. “Experimental Study on Fatigue Performance of Resistance Spot-Welded Sheet Metals.” … International Journal of Advanced Manufacturing …. doi: 10.1007/s00170-021-06822-z.
Fu, L., Z. Tian, Y. Zheng, W. Ye, and S. Zhou. 2022. “The Variation of Load Diffusion and Ballast Bed Deformation with Loading Condition: An Experiment Study.” International Journal of Rail …. doi: 10.1080/23248378.2021.1897958.
Jideani, T. C. U., and P. J. Grabe. 2019. “The Development of Suitable Cyclic Loading and Boundary Conditions for Ballast Box Tests.” Journal of the South African Institution of Civil ….
Kaveh, A., and Talatahari, S. 2017. “Structural Analysis with the LISA System: Step by Step Approach.” CRC Press.
Li, L., Zhang, Y., Liu, Y, and Wang, Y. 2019. “Finite Element Analysis of Welded Joint in Steel Structure.” Journal of Constructional Steel Research (154):290-299.
Wang, Z, Wu, T, Wang, L., Zhao, X., and Xu, Y. 202AD. “Finite Element Analysis on Stress Distribution and Fatigue Life Prediction of High-Strength Steel Welded Joints.” Journal of Constructional Steel Research, 165, 105921.
Zhang, Z, Zhang, Y., and Liu, H. 2018. “Optimization of Fatigue Performance for Welded Details of Steel Bridges.” Engineering Structures, (156,):570-584.
DOI: https://doi.org/10.31315/jmept.v5i1.12020
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Ir. Aco Wahyudi Efendi, ST., MT., IPM
Journal of Metallurgical Engineering and Processing Technology indexed by:
1.png){kind=logo}
Journal of Metallurgical Engineering and Processing Technology (JMEPT)
Department of Metallurgical Engineering, UPN "Veteran" Yogyakarta
Metallurgical Research and Development Centre (MRDC)-UPNVY
Gd. Urip Sumohardjo Lt. 2
Jl. Babarsari No. 2, Tambakbayan, Yogyakarta 55281
View My Stats