Pengaruh Orientasi Arah Serat Terhadap Kekuatan Mekanis Komposit Serat Pandan Dengan Pelapisan Carbon Cloth

Ferdinan Ashada, Sehono Sehono, Dhimas Wicaksono

Abstract


Indonesia has a wealth of natural resources that are very abundant, where one of the natural resources that can be found in Indonesia is plants that contain fiber. At this time plants containing fiber were mostly used for the manufacture of handicrafts. One of the plants in question is the pandan plant, with the passage of time, it is necessary to use fiber from pandan plants so that it can be used for the latest technology. In this study, composites were made using pandan fibers, where for variations of this study, namely 0°, 90° and random. As for the process of making composites using the press method and in coating carbon cloth on composite surfaces using the hand lay up method. In this study, researchers conducted tensile testing based on ASTM D-3039 and for impact testing based on ASTM E-23. The results of this study were for specimens in the best tensile testing was at an angle variation of 90° with an average tensile strength of 29.43 MPa. The highest impact test results are in the 90° variation with an absorbable energy value of 2,622 J and for an impact price value of 0.033 J/mm2.


Keywords


Pandanus, Direction, Carbon, Tensile, Impact

References


Abdurohman, K., & Marta, A. (2016). Kajian Eksperimental Tensile Properties Komposit Poliester Berpenguat Serat Karbon Searah Hasil Manufaktur Vacuum Infusion Sebagai Material Struktur LSU. Jurnal Teknologi Dirgantara, 14(1), 61–72.

Adamy, M. E., Ghofur, M. A., Infantono, A., & Purwantiningsih, Y. T. (2020). Optimasi Desain Dan Analisis Kekuatan Struktur Sayap Komposit, Alumunium dan Titanium Dengan Variasi Material, Thickness Dan Kondisi Batas Menggunakan MSC Patran Nastran (Studi Kasus Pesawat UAV CH-4). Conference SENATIK STT Adisutjipto Yogyakarta, 6, 81–92. https://doi.org/10.28989/senatik.v6i0.430

Ardian, & Djamari, F. (2015). Perancangan Konseptual Pesawat Amphibi Kapasitas 4 Orang Penumpang. Jurnal INDEPT, 5(1), 42–50.

ASTM D3039. (2000). Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials. ASTM International, West Conshohocken, PA.

ASTM E-23. (2000). Charpy Impact Test. ASTM International, West Conshohocken, PA.

Banowati, L., Prasetyo, W. A., & Gunara, D. M. (2017). Analisis Perbandingan Kekuatan Tarik Orientasi Unidirectional 0 ° Dan 90 ° Pada Struktur Komposit Serat Mendong Dengan Menggunakan Epoksi Bakelite EPR 174. Jurnal Infomatek, 19(2), 1.

Irsabudi, A. M., Jatisukamto, G., & Sutjahjono, H. (2021). Karakteristik Aerodinamika Pontoon Pesawat NXXX Versi Amfibi. Jurnal Rekayasa Mesin, 12(2), 475–485.

Mawardi, I., Azwar, A., & Rizal, A. (2017). Kajian Perlakuan Serat Sabut Kelapa Terhadap Sifat Mekanis Komposit Epoksi Serat Sabut Kelapa. Jurnal POLIMESIN, 15(1), 22.

Muhajir, M., Mizar, M. A., & Sudjimat, D. A. (2016). Analisis Kekuatan Tarik Bahan Komposit Matriks Resin Berpenguat Serat Alam Dengan Berbagai Varian Tata Letak. Jurnal Teknik Mesin, 24(2), 1–8.

Muhammad, & Putra, R. (2017). Uji Mekanik Komposit Berpenguat Serat Pandan Duri dan Resin Polyester Dengan Variasi Komposisi Metoda Fraksi Berat. Jurnal Teknologi Kimia Unimal, 6(2), 63–72.

Purboputro, P. I., & Hariyanto, A. (2017). Analisis Sifat Tarik Dan Impak Komposit Serat Rami Dengan Perlakuan Alkali Dalam Waktu 2, 4, 6, Dan 8 Jam Bermatrik Poliester. Jurnal Ilmiah Teknik Mesin, 18(2), 64–75.




DOI: https://doi.org/10.31315/jmept.v3i2.6929

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Journal of Metallurgical Engineering and Processing Technology

Journal of Metallurgical Engineering and Processing Technology indexed by:

 




Journal of Metallurgical Engineering and Processing Technology (JMEPT)


Department of Metallurgical Engineering, UPN "Veteran" Yogyakarta
Metallurgical Research and Development Centre (MRDC)-UPNVY
Gd. Urip Sumohardjo Lt. 2
Jl. Babarsari No. 2, Tambakbayan, Yogyakarta 55281

View My Stats