Analisis Pengujian Cladding pada Aluminium Alloy 2024 Menggunakan Metode Eddy Curent di PT Garuda Maintenance Facility AeroAsia

Agris Setiawan, Taufan Triandika, Dyah Probowati

Abstract


Non-destructive testing(NDT)  adalah pengujian material untuk menentukan kualitas dan integritas material atau elemen struktur tanpa memengaruhi kemampuan untuk menjalannya fungsinya. NDT itu sendiri memiliki beberapa metode pengujian, yaitu radiograph testing, eddy current testing, thermal testing, penetrant testing, ultrasonic testing, dan visual testing. Metode eddy curent biasanya digunakan untuk melihat crack maupun mengetahui perbedaan suatu material melalui nilai konduktivitasnya. Pada penelitian ini dimaksudkan untuk menanalisis dari teori yang ada dengan yang terjadi dilapangan, dengan menambahkan variasi ketebalan pada Aluminium clad sheet 2024. Cladding test sangat umum dilakukan di industri aviasi untuk menghindari, mengetahui lebih awal dan menanggulangi kecelakaan yang diakibatkan korosi karena cladding sudah hilang.


Keywords


Non-Destructive Testing, Eddy current, Cladding, Konduktivitas

Full Text:

PDF

References


Culpan, E.A., Rose, G. (1978). Microstructural characterization of cast nickel aluminium bronze. Journal of Materials Science, Vol. 13: 1647–1657.

Jahanafrooz, A., F Hasan, Lorimer, G. W., et al. (1983). Microstructural development in complex nickel aluminum bronzes. Metallurgical Transactions A, 14: 1951–1956.

Richardson, I. (2016). Guide to nickel aluminium bronze for engineers. USA: Copper Development Association,.

Tian, R. Z., Wang, Z. T. (2007). Handbook of copper alloy and its processing. Changsha: Central South University Press,

Hauer, M., Gärtner, F., Krebs, S. (2021). Process selection for the fabrication of cavitation erosion-resistant bronze coatings by thermal and kinetic spraying in maritime applications. Journal of Thermal Spray Technology, 30: 1310–1328.

Engineering Data for Metals and Alloys. (2018). In Metals Handbook Desk Edition. https://doi.org/10.31399/asm.hb.mhde2.a0003082

Janovec, M., Smetana, M., & Bugaj, M. (2019). Eddy current array inspection of Zlin 142 fuselage riveted joints. Transportation Research Procedia, 40. https://doi.org/10.1016/j.trpro.2019.07.042

Janousek, L.; Capova, K.; Yusa, N.; Miya, K. 2008. Multiprobe inspection for enhancing sizing

Md. Mahi Uddin Khanz. (2000). Detection of defect on Aircraft Multi-layered Structure by Eddy Current technique(C/C INTRO, BELUM CONFIRM). 15th World Conference on Nondestructive Testing Roma (Italy) 15-21 October 2000, 43.

Megson, T. H. G. (2013). Aircraft Structures for Engineering Students. In Aircraft Structures for Engineering Students. https://doi.org/10.1016/C2009-0-61214-9

Nondestructive Testing Standards: Present and Future. (1992). In Nondestructive Testing Standards: Present and Future. https://doi.org/10.1520/stp1151-eb

Workman, G. L., Moore, P. O., Testing, A. S. for N., Jolly, M., Prabhakar, A., Sturzu, B., … Shaw, A. (2012). Nondestructive Testing Overview. In Procedia CIRP (Vol. 38).

Yamada, S.; Chomsuwan, K.; Iwahara. 2006. Application of giant magnetoresistive sensor for nondestructive evaluation. In Proceedings of the IEEE Sensors, Daegu, South Korea, October; pp. 927-930.

Mercier, D.; Lesage, J.; Decoopman, X.; Chicot, D. 2006. Eddy currents and hardness testing for evaluation of steel decarburizing. NDT E Int. 2006, 39, 652-660.

Rasson, J.; Delipetrov. 2006. T. Progress and limitations in magnetic field measurements. In Geomagnetics for Aeronautical Safety, 1st ed.; Novkovski, N. Ed.; Springer: Dordrecht, The Nederlands, Volume 13, pp. 201-212

Yang, B., Luo, F., & Han, D. (2006). Pulsed eddy current technique used for non-destructive inspection of ageing aircraft. Insight: Non-Destructive Testing and Condition Monitoring, 48(7). https://doi.org/10.1784/insi.2006.48.7.411




DOI: https://doi.org/10.31315/jmept.v3i2.8781

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Journal of Metallurgical Engineering and Processing Technology

Journal of Metallurgical Engineering and Processing Technology indexed by:

 




Journal of Metallurgical Engineering and Processing Technology (JMEPT)


Department of Metallurgical Engineering, UPN "Veteran" Yogyakarta
Metallurgical Research and Development Centre (MRDC)-UPNVY
Gd. Urip Sumohardjo Lt. 2
Jl. Babarsari No. 2, Tambakbayan, Yogyakarta 55281

View My Stats