ANALISIS PENGARUH MASSA BAHAN PELEDAK TERHADAP GROUND VIBRATION UNTUK MENDAPATKAN PPV ≤ 3MM/S PADA JARAK 300M PIT INUL MIDDLE 3B, PT KALTIM PRIMA COAL, KABUPATEN KUTAI TIMUR, PROVINSI KALIMANTAN TIMUR
Abstract
Keywords
Full Text:
PDFReferences
Agrawal, Hermant dan A.K. Mishra (2018) : Modified scaled distance regression analysis approach for prediction of blast-induced ground vibration in multi-hole blasting. India, Dhanbad, Department of Mining Engineering, Indian Institute of Technology (Indian School of Mines).
Berta, G. (1985) : An Engineering Tool. Italia, Milan.
Bhandari, S. (1997) : Engineering Rock Blasting Operations. Rotterdam, A.A. Balkema.
Dowding, Charles. H, (1985) : Blast Vibration Monitoring And Control.Prentice – Hall. Inc: USA
Esen, S. dkk (2003) : Modelling the size of the crushed zone around a blasthole. International Journal of Rock Mechanics & Mining Sciences 40 (2003) 485–495.
Fourney, W.L., Barker, D.B., dan Holloway, D.C. (1981): Model Studies of Explosive Well Stimulation Techniques. Int. J. Rock Meck. Min. Sci. & Geomech. Abstr. Vol. 18. Pp. 113-127.
Hayat, M.B., Alagha, dan L., Ali, D. (2019) : Air Decks in Surface Blasting Operations. Journal of Mining Science, Vol. 55, No. 6, pp. 922-929.
Hustrulid, W. (1999): Blasting Principle for Open Pit Mining. Colorado, Colorado School of Mines.
Jinemo, C.L., Jinemo, E.L., dan Cardeco, F.J.A. (1995) : Drilling and Blasting of Rock. Rotterdam, A.A. Balkema.
Kanchibotla, S.S. dkk (1999) : Modelling fines in blast fragmentation and its impact on crushing and grinding. Proceedings of Explo’99—A Conference on Rock Breaking. The Australasian Institute of Mining and Metallurgy, Kalgoorlie, Australia. p. 137–44.
Koesnaryo. (2011) : Teknik Peledakan Batuan. Yogyakarta, Jurusan Teknik Pertambangan, Fakultas Teknologi Mineral, UPN “Veteran” Yogyakarta
Konya, J.C., dan Walter, E.J. (1990): Surface Blast Design. Ohio, Intercontinental Development
Naapuri, J. (1987) : Surface Drilling and Blasting. Tamrock.
Olofsson, S.O. (1990) : Applied Explosives Technology for Construction and Mining. Sweden, APPLEX.
Sheriff, R. E. dan Geldart L.P. (1995) : Exploration Seismology, Newyork, Cambridge University Press.
Siagian, K. J. (2014): Analisis Geometri Peledakan Untuk Mendapatkan NIiai PPV ≤ 2 mm/s Pada Jarak 500 m, PT. Orica Mining Services, Site PT. KPUC, Samarinda, Kalimantan Timur. Yogyakarta, Jurusan Teknik Pertambangan, Fakultas Teknologi Mineral, UPN “Veteran” Yogyakarta.
Sun, C. (2013): Damage Zone Prediction for Rock Blasting. Disertasi, University of Utah.
Telford, W.M. dkk (1990), Applied Geophysics, 2nd ed, Cambridge University Press.
Walpole, R.E. (1995). Pengantar Statistika, edisi ke-3, Penerbit PT. Gramedia Pustaka Utama, Jakarta
Zou, D. (2017): A Text Book of Computer Based Numerical and Statistical Technique: New Age International Limited Publishers. Singapore, Metallurgical Industry Press dan Springer.
DOI: https://doi.org/10.31315/jtp.v9i2.11876
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Muhammad Wildan Ilyasa, Singgih Saptono, Indri Lesta Siwidiani, Indun Titisariwati, Wawong Dwi Ratminah
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
INDEXING SERVICES
Alamat: Jl. Pajajaran Condongcatur, Depok, Sleman, Yogyakarta 55283
Telp./ Fax. (0274) 486702, Email:jurnaljtp@gmail.com