Pembuatan Biokompatibel Suture Anchor Berbasis 3D Printing Filament dari Nano Hidroksiapatit Berbahan Dasar Cangkang Keong Sawah

Tesa Ulima Zhafira, Baskoro David Berlian, Achmad Dwitama Karisma

Abstract


Suture anchor is used to attach soft tissues to the bone. One of the materials that can be used for making suture anchors is hydroxyapatite [Ca10(PO4)6(OH)2]. Hydroxyapatite (HAp)  has similarities with the properties of bone minerals, so it has the potential to be used as a material for making biocompatible suture anchors. However, HAp is brittle and has poor strength, so HAp is usually combined with polymers such as composites to overcome the limitations of its mechanical properties. One of the polymers that can be used is Polycaprolactone (PCL). In this study, HAp was synthesized from rice field snail shells, due to its high calcium contents.  Further, the combination of HAp and PCL in the manufacture of 3D printing filaments such as suture anchors was obtained. The variables used in this study were the mixing ratio of HAp:PCL in making filaments with a mixing ratio of 0.5:9.5; 1:9 ; 2:8. The results of various variables shows that the tensile strength most optimal composite in 7,3 % when mixing HAp:PCl is 0.5:9,5.

Keywords


3D Printing Filaments; Field Snail Shell; Hydroxyapatite; Polycrapolactone; Suture Anchor

Full Text:

PDF

References


Dahlan, K., Asra, D. Y. and Winata, B. C. Synthesis of calcium phosphate compound from paddy field snail shells (pila ampullacea) as calcium precursor. Journal of Physics: Conference Series 2020; 1485 (1).

Hedayati, Seyyed Kaveh, Amir Hossein Behravesh, Sadegh Hasannia, Omid Kordi, Majid Pourghaumi, Arvin Bagheri Saed, and Fatemeh Gashtasbi. 2022. “Additive Manufacture of PCL/NHA Scaffolds Reinforced with Biodegradable Continuous Fibers: Mechanical Properties, in-Vitro Degradation Profile, and Cell Study.” European Polymer Journal 162(October 2021):110876. doi: 10.1016/j.eurpolymj.2021.110876.

Jaafar, C. N. Aiza, I. Zainol, and M. I. Izyan Khairani. 2022. “Physical and Mechanical Properties of Tilapia Scale Hydroxyapatite-Filled High-Density Polyethylene Composites.” Polymers 14:1–17.

Romelczyk-baishya, Barbara, Agnieszka Chodara, and Iwona Koltsov. 2022. “Microstructure and Mechanical Properties of Inverse Nanocomposite Made from Polylactide and Hydroxyapatite Nanoparticles.” Materials 15:1–23.

Rondonuwu, C. R., Saerang, J. L. P., Utiah, W., & Regar, M. N. (2018). Pengaruh Pemberian Tepung Keong Sawah (Pila Ampulacea) Sebagai Penganti Tepung Ikan Dalam Pakan Terhadap Kualitas Telur Burung Puyuh (Coturnix Coturnix Japonica). Fakultas Perternakan Universitas Sam Ratulangi, 38(1), 1–8Sattary, Mansoureh, Amirhosein Kefayat, Ashkan Bigham, And Mohammad Rafienia. 2020. “Polycaprolactone/Gelatin/Hydroxyapatite Nanocomposite Scaffold Seeded With Stem Cells From Human Exfoliated Deciduous Teeth To Enhance Bone Repair: In Vitro And In Vivo Studies.” Materials Technology 00(00):1–14. Doi: 10.1080/10667857.2020.1837488.

Simatupang, N. & Suprayogi, M. K. 2019. Survey Cedera Olahraga Pada Atlet Sepak Bola Pplp Sumatera Utara. Jurnal Unimed, 3(1), Pp. 55-65.

Siregar, R. F. et al. Sintesis Biomaterial Hidroksiapatit Porous dengan Prekursor Cangkang Keong Mas dan Porogen Pati Sukun (Artocarpus altilis). Seminar Nasional Teknik Kimia Ecosmart 2018; 195–202.

Sharifianjazi, Fariborz, Amirhossein Esmaeilkhanian, Mostafa Moradi, Amirhosein Pakseresht, Mehdi Shahedi Asl, Hassan Karimi-Maleh, Ho Won Jang, Mohammadreza Shokouhimehr, And Rajender S. Varma. 2021. “Biocompatibility And Mechanical Properties Of Pigeon Bone Waste Extracted Natural Nano-Hydroxyapatite For Bone Tissue Engineering.” Materials Science And Engineering B: Solid-State Materials For Advanced Technology 264(October 2020):114950. Doi: 10.1016/J.Mseb.2020.114950.

Smith, Alissa. 2018. “Design And Testing Of A Sheath Device To Secure Rotator Cuff Anchors In Osteoporotic Bone.” Thesis, Grand Valley State University.

Su, Ting Yu, Hao Yuan Tang, Jason Shian Ching Jang, Chih Hwa Chen, And Hsiang Ho Chen. 2021. “Design And Development Of Magnesium-Based Suture Anchor For Rotator Cuff Repair Using Finite Element Analysis And In Vitro Testing.” Applied Sciences (Switzerland) 11(20):1–14. Doi: 10.3390/App11209602.

Tai, Chien Cheng, Hon Lok Lo, Chen Kun Liaw, Yu Min Huang, Yen Hua Huang, Kuo Yi Yang, Chih Chieh Huang, Shin I. Huang, Hsin Hsin Shen, Tzu Hung Lin, Chun Kuan Lu, Wen Chih Liu, Jui Sheng Sun, Pei I. Tsai, And Chih Yu Chen. 2021. “Biocompatibility And Biological Performance Evaluation Of Additive-Manufactured Bioabsorbable Iron-Based Porous Suture Anchor In A Rabbit Model.” International Journal Of Molecular Sciences 22(14). Doi: 10.3390/Ijms22147368.

Taji, Lulu Sekar, Deden Eko Wiyono, Achmad Dwitama Karisma, Agus Surono, And Eva Oktavia Ningrum. 2022. “Hydroxyapatite Based Material : Natural Resources , Synthesis Methods , 3d Print Filament Fabrication , And Filament Filler.” 8(1):26–35.


Refbacks

  • There are currently no refbacks.
slot gacor slot gacor hari ini slot gacor 2025 demo slot pg slot gacor slot gacor