Pembuatan Surfaktan Berbahan Dasar Jerami Padi
Sari
Indonesia's oil production has declined due to the low level of production of oil wells that have been old. Extraction of oil from the wells can be enhanced by the injection of surfactant. Potential raw material for the manufacture of surfactants, especially the waste material so that lower-priced. This material include lignocellulosic materials and plantation agricultural waste. Rice straw is one of them. This study aims to make surfactants from rice straw. The axpetriment was conducted through the steps of: (1) preparation of raw materials, (2) delignification and isolation of lignin, (3) sulfonation of lignin using NaHSO3 . Delignification of rice straw held at a temperature of 166o C and a pressure of 1.2 atm. Sulfonated of lignin conducted at a temperature of 90-95°C and pH 7. Lignin and sodium lignosulfonate tested using FTIR and gravimetric. The results show at 2.5 g lignin, weight percent of NaHSO3 60% of the weight of lignin, pH 7, temperature 90-95 ° C for 4 hour reaction obtained 2,5509 g of sodium lignosulfonate (SLS). Sodium lignosulfonate is soluble in water. Sodium lignosulfonate phase behavior test using crude oil from Oil Drilling Tanjung, South Kalimantan, at the surfactant concentration 3000 and 5000 ppm result that the type of emulsion is water in oil. So that this surfactant not suggested for EOR.
Kata Kunci
Teks Lengkap:
PDFDOI: https://doi.org/10.31315/e.v11i1.328
Refbacks
##plugins.generic.alm.title##
Metrics powered by PLOS ALM
Eksergi ISSN-p 1410-394X, ISSN-e 2460-8203 diterbitkan oleh Prodi Teknik Kimia Universitas Pembangunan Nasional "Veteran" Yogyakarta.
Sekretariat: Prodi Teknik Kimia UPN "Veteran" Yogyakarta Jl. SWK 104 (Lingkar Utara) Condong catur Sleman Yogyakarta 55283
Eksergi by http://jurnal.upnyk.ac.id/index.php/eksergi/index/ is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Jumlah Pengunjung: