Analysis of Tin Grade and Recovery in Monazite Retreatment with Three Disc Magnetic Separator

Lintang Larasati Adi Putri, Dyah Probowati, Yasmina Amalia

Abstract


Retreatment is conducted to obtain tin that remains in the monazite tailings (2-3% Sn)  from the processing that has been carried out by PT. Timah. The purpose of this study is to analyse the presence of tin in monazite as well as the effect of magnetic intensity and opening feed on recovery and tin grade by employing a quantitative method of experimentation with three disc magnetic separator. In this study, magnetic intensity was used with disc 1, 2, and 3 respectively is 1.1 T, 1.3 T, 1.5 T (A); 1.3 T, 1.5 T, 1.7 T (B); and 1.5 T, 1.7 T, 1.9 T (C) with opening feed 0.4 cm and 0.8 cm. Based on the experiment, the highest tin grade is 7.33% with the largest combination of magnetic intensity, variation C, and opening feed 0.4 cm. Meanwhile, the highest recovery of 73.64% was obtained at the lowest magnetic intensity, variation A, with the same opening feed. It can be seen that by increasing the magnetic intensity, the tin content will be higher. Meanwhile based on some related experiment, the larger the opening feed, the higher the recovery. However, it should be noted that the opening feed used must not exceed 0.8 cm. If the opening feed used is equal or wider than 0.8 cm, it requires a strong magnetic intensity or the grade and recovery produced will not change significantly.


Keywords


Magnetic Intensity; Mineral Processing; Recovery; Three Disc Magnetic Separator; Tin Grade

Full Text:

PDF

References


Balaram, V. (2019). Rare earth elements: A review of applications, occurrence, exploration, analysis, recycling, and environmental impact. Geoscience Frontiers, 10(4), 1285–1303. https://doi.org/10.1016/j.gsf.2018.12.005

Blankson Abaka-Wood, G., Addai-Mensah, J., & Skinner, W. (2016). Magnetic Separation of Monazite from Mixed Minerals. Chemeca. Retrieved from https://www.researchgate.net/publication/311440437

Dieye, M., Thiam, M. M., Geneyton, A., & Gueye, M. (2021). Monazite Recovery by Magnetic and Gravity Separation of Medium Grade Zircon Concentrate from Senegalese Heavy Mineral Sands Deposit. Journal of Minerals and Materials Characterization and Engineering, 09(06), 590–608. https://doi.org/10.4236/jmmce.2021.96038

Fadhil, F., Yusuf, M., & Ningsih, Y. B. (2021). PROSES PENINGKATAN KADAR MINERAL MAGNETIT (Fe3O4) MENGGUNAKAN MAGNETIC SEPARATOR DENGAN VARIABEL LEBAR LUBANG UMPAN DAN LAMA WAKTU FEEDING UNTUK MEMENUHI BAHAN BAKU PEMBUATAN TINTA KERING (TONER). PROSIDING SEMINAR NASIONAL PENELITIAN DAN PENGABDIAN MASYARAKAT AVOER 13, 471–477. Retrieved from http://ejournal.ft.unsri.ac.id/index.php/avoer/article/view/929/570

Fuerstenau, M. C., & Han, K. N. (Eds.). (2003). Principles of Mineral Processing. Society for Mining, Metallurgy, and Exploration.

Goodman, P. D., Skipper, R., & Aitken, N. (2015). Modern instruments for characterizing degradation in electrical and electronic equipment. In Reliability Characterisation of Electrical and Electronic Systems (pp. 43–62). Elsevier Inc. https://doi.org/10.1016/B978-1-78242-221-1.00004-6

Habashi, Fathi. (1997). Handbook of extractive metallurgy. Wiley-VCH.

Kim, K., & Jeong, S. (2019). Separation of monazite from placer deposit by magnetic separation. Minerals, 9(3). https://doi.org/10.3390/min9030149

Lottermoser, B. (2010). Mine Wastes Characterization, Treatment and Environmental Impacts (3rd ed.). Berlin: Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-642-12419-8

Louis, H. M. A. , D. Sc. , A. R. S. M. (1911). Metallurgy of Tin. London: Mc-Graw Hill Book Company.

Morikawa, A. (2014). Sample preparation for X-ray fluorescence analysis II.Pulverizing methods of powder samples. Rigaku Journal, 30(2), 23–27.

Pratama, M. R., Pitulima, J., & Taman Tono, E. P. S. B. (2021). Kajian Perolehan Hasil Bijih Timah Berdasarkan Ukuran Butir Terhadap Variabel Magnetic Separator Skala Laboratorium (Study of Lead Ore Yield Based on Grain Size Against Laboratory Scale Magnetic Separator Variables). MIning Journal Exploration, Exploitation, Georesource Processing and Mine Environmental, 6(2), 32–38.

PT. Timah. (2022). NAVIGATING CHALLENGES DELIVERING HIGHER VALUES PT TIMAH Tbk.

Salim, Z., & Munadi, E. (2016). Info Komoditi Timah.

Tripathy, S. K., Banerjee, P. K., Suresh, N., Murthy, Y. R., & Singh, V. (2017, November 2). Dry High-Intensity Magnetic Separation In Mineral Industry—A Review Of Present Status And Future Prospects. Mineral Processing and Extractive Metallurgy Review, Vol. 38, pp. 339–365. Taylor and Francis Inc. https://doi.org/10.1080/08827508.2017.1323743

Tripathy, S. K., & Suresh, N. (2017). Influence of particle size on dry high-intensity magnetic separation of paramagnetic mineral. Advanced Powder Technology, 28(3), 1092–1102. https://doi.org/10.1016/j.apt.2017.01.018

USGS. (2023). MINERAL COMMODITY SUMMARIES 2023. Virginia.

Wills, B. A., & Finch, J. A. (2016). Wills’ Mineral Processing Technology. Elsevier. https://doi.org/10.1016/C2010-0-65478-2

World Health Organization., & WHO Expert Committee on Specifications for Pharmaceutical Preparations (39th : 2004 : Geneva, S. (2005). WHO Expert Committee on Specifications for Pharmaceutical Preparations : thirty-ninth report. World Health Organization.

Zong, Q. X., Fu, L. Z., & Bo, L. (2018). Variables and Applications on Dry Magnetic Separator. E3S Web of Conferences, 53. EDP Sciences. https://doi.org/10.1051/e3sconf/20185302019




DOI: https://doi.org/10.31315/jmept.v5i1.12900

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Lintang Larasati Adi Putri

Journal of Metallurgical Engineering and Processing Technology indexed by:

 




Journal of Metallurgical Engineering and Processing Technology (JMEPT)


Department of Metallurgical Engineering, UPN "Veteran" Yogyakarta
Metallurgical Research and Development Centre (MRDC)-UPNVY
Gd. Urip Sumohardjo Lt. 2
Jl. Babarsari No. 2, Tambakbayan, Yogyakarta 55281

View My Stats