Magnetic Flux Leakage for Tank Inspection 2F-4905

Rangga Buana

Abstract


In the world of metal and non-metal industries, materials are a common thing. However, to get a quality material, a test needs to be done. One of them is the Magnetic Flux Leakage (MFL) method which is widely used for Non-Destructive Test (NDT). NDT is one of the activities to test the properties of metals which is often known as physical metallurgy. In this study, it was carried out to detect defects or corrosion in the bottom of storage tank 2F-4905 at PT Mitsubishi Chemical Indonesia by applying API 650 Standard. This is done as a form of occupational health and safety program to ensure there is no potential damage that can cause leaks in the future. The results obtained from the inspection found no irregularities or defects in the test results that did not meet the acceptance criteria set by PT MCCI based on the standard for storage tanks, namely API 650.

Keywords


Non Destructive Test; Magnetic Flux Leakage; Discontinuities; Physical Metallurgy

Full Text:

PDF

References


Alexandri, A., & Sugandika, T. (2017). Magnetic Particle Inspection (MPI) Sebagai Salah Satu Metode Inspeksi Menara Pengeboran. Forum Teknologi, 04, 76–91.

Azaman, N., Abidin, I. M. Z., & Latif, N. A. A. (2015). Preliminary Study of Magnetic Flux Leakage On Tube Inspection.

Feng, B., Wu, J., Tu, H., Tang, J., & Kang, Y. (2022). A Review of Magnetic Flux Leakage Nondestructive Testing. In Materials (Vol. 15, Issue 20). https://doi.org/10.3390/ma15207362

Irwansyah. (2019). Deteksi Cacat Pada Material Dengan Teknik Pengujian Tidak Merusak. Lensa, 2(48).

Jim, C., Pearson, N., & Boat, M. (2016). Capability of modern tank floor scanning with Magnetic Flux Leakage. Conference Proceedings of The 19th World Conference on Non-Destructive Testing.

Kang, X. W., Xiong, Z. K., Zhang, L., He, R. B., Meng, X. J., Chen, J. Z., & Zhang, X. W. (2021). Simulation and Experimental Research on Magnetic Flux Leakage Detection Method of Long-distance Pipeline Local Dents Stress. Journal of Physics: Conference Series, 1894(1). https://doi.org/10.1088/1742-6596/1894/1/012088

Irfan, M. (2018). Standard Operating Procedure for Magnetic Flux Leakage Above Ground Storage Tank.

Nurdin, L. (2021). Inspection on PX Tank 2F-4905.

Pearson, N. R., Boat, M. a, Priewald, R. H., Pate, M. J., & Mason, J. S. D. (2012). Practical capabilities of MFL in steel plate inspection. 18th World Conference on Nondestructive Testing, 16-20 April 2012, Durban, South Africa, April.

Pearson, N. R., Marshall, S., Wayne, Woodhead, & Ashton, A. (2016). Use of Water Immersion UT Techniques to Assist with Data Capture and Analysis. E-Journal of Nondestructive Testing (EJNDT) 1435-4934.

Prémel, D., Fnaeich, E. A., Djafa, S., Pichon, L., Trillon, A., & Bisiaux, B. (2012). Simulation of magnetic flux leakage: Application to tube inspection. AIP Conference Proceedings, 1430(31).

https://doi.org/10.1063/1.4716445

Shao, W., Sun, M., Ma, Y., Chen, J., Kang, X., Meng, T., & He, R. (2020). Data Analysis of Magnetic Flux Leakage Detection Based on Multi-Source Information Fusion. Studies in Applied Electromagnetics and Mechanics, 45. https://doi.org/10.3233/SAEM200033

Sharif, N. A., Ramli, R., Mohamed, A. Z., & Zaki Nuawi, M. (2019). Theory and development of magnetic flux leakage sensor for flaws detection: A review. International Journal of Advances in Applied Sciences, 8(3). https://doi.org/10.11591/ijaas.v8.i3.pp208-216

Shi, Y., Zhang, C., Li, R., Cai, M., & Jia, G. (2015). Theory and application of magnetic flux leakage pipeline detection. In Sensors (Switzerland) (Vol. 15, Issue 12). https://doi.org/10.3390/s151229845

Wu, J., Wu, W., Li, E., & Kang, Y. (2021). Magnetic Flux Leakage Course of Inner Defects and Its Detectable Depth. Chinese Journal of Mechanical Engineering (English Edition), 34(1). https://doi.org/10.1186/s10033-021-00579-y




DOI: https://doi.org/10.31315/jmept.v4i1.8668

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Journal of Metallurgical Engineering and Processing Technology

Journal of Metallurgical Engineering and Processing Technology indexed by:

 




Journal of Metallurgical Engineering and Processing Technology (JMEPT)


Department of Metallurgical Engineering, UPN "Veteran" Yogyakarta
Metallurgical Research and Development Centre (MRDC)-UPNVY
Gd. Urip Sumohardjo Lt. 2
Jl. Babarsari No. 2, Tambakbayan, Yogyakarta 55281

View My Stats