Raw Mill Machine Effectiveness Measurement through the Total Productive Maintenance (TPM) Implementation

Shandy Satria Wangsa Putra, Berty Dwi Rahmawati

Abstract


PT X is a cement manufacturer company that experienced a loss of production caused by the high value of downtime. Based on downtime data, the raw mill machine appears to have the most significant value in machine downtime. This study aims to measure the raw mill machine's effectiveness in applying Total Productive Maintenance (TPM). The method used in this research is Overall Equipment Effectiveness (OEE). This method measures engine effectiveness and loss factor analysis using the Six Big Losses method, as well as finding the root cause through a five why and cause and effect diagram to give the most suitable recommendations. The result of this study found that the average OEE value in 2021 was below the international OEE standard of 85%, which is 72% and 67% for Raw Mill Plant 9 and Raw Mill Plant 10, respectively. The low performance of Raw Mill Plant 9 and Raw Mill Plant 10 machines is a consequence of breakdown losses and reduced speed losses that had happened. The root causes were a lack of training for mechanics and no stock control for spare parts. The recommendations are to improve training programs and facilities and create a spare parts inventory management system.


Keywords


Total Productive Maintenance ; Overall Equipment Effectiveness ; Six Big Losses; Five Whys; Cause and Effect Diagram

References


Ariani, D. W. (2020). Manajemen Kualitas (2nd ed.). Tangerang: Universitas Terbuka.

Ben-Daya, M., et al. (2009). Handbook of Maintenance Management and Engineering. Cham: Springer.

Beyene, T. D., Gebeyehu, S. G., & Mengistu, A. T. (2018). Application of Failure Mode Effect Analysis (FMEA) to Reduce Downtime in a Textile Share Company. Journal of Engineering, Project, and Production Management, 8(1), 40–46. https://doi.org/10.32738/jeppm.201801.0005.

Febriyanti, D., & Fatma, E. (2018). Analisis Efektivitas Mesin Produksi Menggunakan Pendekatan Failure and Mode Effect Analysis dan Logic Tree Analysis. JIEMS (Journal of Industrial Engineering and Management Systems), 11(1), 39–47. https://doi.org/10.30813/jiems.v11i1.101.

Harrington, H. J., & Voehl, F. (2016). The Innovation Tools Handbook. CRC Press. https://doi.org/10.1002/9781118823194.ch10.

Li, Y., Chang, Q., Xiao, G., & Arinez, J. (2015). Data-Driven Analysis of Downtime Impacts in Parallel Production Systems. IEEE Transactions on Automation Science and Engineering, 12(4), 1541–1547. https://doi.org/10.1109/TASE.2015.2443111.

Lindström, J., Kyösti, P., Birk, W., & Lejon, E. (2020). An Initial Model for Zero Defect Manufacturing. Applied Sciences (Switzerland), 10(13), 1–16. https://doi.org/10.3390/app10134570.

Naufal, A. F., & Achmadi, F. (2017). Pasar Industri Semen di Jawa Timur ( Studi Kasus Perusahaan “ A”). Jurnal Bisma, 11(2), 124–138.

Nisak, Z. (2013). Analisis SWOT untuk Menentukan Strategi Kompetitif. Jurnal Ekbis, 9(2), 468–476.

Prabowo, H. A., Farida, & Rahmawan, D. I. (2015). Improve the Work Effectiveness with Overall Equipment Effectiveness (OEE) as the Basis for Optimizing Production. Jurnal Penelitian Dan Aplikasi Sistem & Teknik Industri (PASTI), IX(3), 286–299.

Puteri, R. A. M. (2014). Analisis Pengaruh Nilai Availability dan Waktu Downtime terhadap Produktivitas Mesin pada Automatic Ampoule Filling Dan Sealing Machine Di PT Indofarma Tbk. Seminar Nasional Sains Dan Teknologi 2014, November, 1–4.

Saipudin, S. (2019). Analisis Perhitungan Overall Equipment Effectiveness ( OEE ) Untuk Peningkatkan Nilai Efektivitas Mesin Oven Line 7 Pada PT . UPA. Skripsi. Jakarta: Universitas Mercu Buana http//:mercubuana.ac.id.

Suarly, I., Purba, J. T., Pramono, R., & Ugut, G. S. (2022). Strategi Menghadapi Badai Krisis Industri Semen di Indonesia Studi Kasus: SMGR dan INTP. Jurnal Ilmiah Indonesia, 7(3), 3309–3323.

Suwarma, R. R., & Pramudiana, Y. (2013). Pemetaan Struktur, Perilaku, dan Kinerja Pada Indsutri Semen Indonesia. Jurnal Manajemen Indonesia, 12(4), 249–264.

Vardhan, S., Gupta, P., & Gangwar, V. (2015). The impact of Quality Maintenance Pillar of TPM on Manufacturing Performance. IEOM 2015 - 5th International Conference on Industrial Engineering and Operations Management, Proceeding. https://doi.org/10.1109/IEOM.2015.7093741.

Wiersema, M. F., & Bowen, H. P. (2008). Corporate Diversification: The Impact of Foreign Competition, Industry Globalization, and Product Diversification. Strategic Management Journal, 29(2), 115–132. https://doi.org/10.1002/smj.653.




DOI: https://doi.org/10.31315/opsi.v15i1.7729

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Sekretariat :
Jurusan Teknik Industri
FTI UPN "Veteran" Yogyakarta
d.a Jalan Babarsari 2 Tambakbayan Yogyakarta 55281
Telp. (0274) 486256
Website http://jurnal.upnyk.ac.id/index.php/opsi
email : jurnal.opsi@upnyk.ac.id

 

indexed by:

 
 
 


Lisensi Creative Commons
This work is Licensed Under a Creative Commons Attribution 4.0 International license.

View My Stats