Modified Polyethersulfone (PES) Membran Methods to Improve Anti-fouling −Mini Review

Enny Nurmalasari, Hasnah Ulia, Apsari Puspita Aini, Agung Kurnia Yahya, Yunita Fahni

Abstract


Polyethersulfone (PES) is the most common material in various medical and water treatment applications because of its excellent mechanical and thermal properties. The hydrophobicity of polyethersulfone is considered as one of the main drawbacks because the hydrophobic surface causes a high biofouling effect on the membrane, so it has limitations in using Polietersulfon PES membrane technology. Modification of PES membranes is an important topic to be continuously developed to improve the properties of PES membranes. Membrane modifications focus on increasing the hydrophilicity, selectivity, and stability of membranes that are expected to be used commercially. Modifications were made to change the hydrophobic membrane surface into a hydrophilic membrane with good mechanical properties by introducing hydrophilic properties and functional groups to the polyethersulfone membrane surface. This review includes reviews and discussions on modifying PES membranes by mixing, coating, and grafting methods. In particular, adding functional groups to polyethersulfone is a suitable method for introducing hydrophilic properties. The addition of nanomaterials to the surface of the polyethersulfone membrane by mixing, coating, grafting, and combinations significantly increases the surface of the membrane, and all modifications affect the surface roughness of the membrane.

Keywords


Membran PES; Modifikasi; Coating; Grafting; Pencampuran

References


Abdi, Sara dkk. 2021. “Fabrication of PES-Based Super-Hydrophilic Ultrafiltration Membrans by Combining Hydrous Ferric Oxide Particles and UV Irradiation.” Separation and Purification Technology 259.

Ahmadi, Hajireza, Mehran Javanbakht, Behrouz Akbari-adergani, and Meisam Shabanian. 2019. “Photo-Grafting of β-Cyclodextrin onto the Polyethersulfone Microfiltration-Membran: Fast Surface Hydrophilicity Improvement and Continuous Phthalate Ester Removal.” Journal of Applied Polymer Science 136(24).

Al-Jumaili, Ahmed dkk. 2018. “Plasma Treatment of Polymeric Membrans.” In Non-Thermal Plasma Technology for Polymeric Materials: Applications in Composites, Nanostructured Materials, and Biomedical Fields,.

Alenazi, Noof A., Mahmoud A. Hussein, Khalid A. Alamry, and Abdullah M. Asiri. 2017a. “Modified Polyether-Sulfone Membran: A Mini Review.” Designed Monomers and Polymers 20(1): 532–46. https://doi.org/10.1080/15685551.2017.1398208.

Alenazi, Noof A, Mahmoud A Hussein, Khalid A Alamry, and Abdullah M Asiri. 2017b. “Modified Polyether-Sulfone Membran: A Mini Review) Modified Polyether-Sulfone Membran: A Mini Review, Designed Monomers and Polymers, Modified Polyether-Sulfone Membran: A Mini Review.” DesigneD MonoMers anD PolyMers 20(1).

Arefi-Oskoui, Samira dkk. 2022. “Development of MoS2/O-MWCNTs/PES Blended Membran for Efficient Removal of Dyes, Antibiotic, and Protein.” Separation and Purification Technology 280.

Asadollahi, Mahdieh dkk. 2020. “Improvement of Performance and Fouling Resistance of Polyamide Reverse Osmosis Membrans Using Acrylamide and TiO2 Nanoparticles under UV Irradiation for Water Desalination.” Journal of Applied Polymer Science 137(11).

Belfer, S., R. Fainchtain, Y. Purinson, and O. Kedem. 2000. “Surface Characterization by FTIR-ATR Spectroscopy of Polyethersulfone Membrans-Unmodified, Modified and Protein Fouled.” Journal of Membran Science 172(1–2).

Boricha, Alka G., and Z. V.P. Murthy. 2009. “Preparation, Characterization and Performance of Nanofiltration Membrans for the Treatment of Electroplating Industry Effluent.” Separation and Purification Technology 65(3).

Van Der Bruggen, B. 2009. “Chemical Modification of Polyethersulfone Nanofiltration Membrans: A Review.” Journal of Applied Polymer Science 114(1).

Chen, Yifeng dkk. 2013. “Biofouling Control of Halloysite Nanotubes-Decorated Polyethersulfone Ultrafiltration Membran Modified with Chitosan-Silver Nanoparticles.” Chemical Engineering Journal 228.

Cheng, Chong dkk. 2012. “The Hydrodynamic Permeability and Surface Property of Polyethersulfone Ultrafiltration Membrans with Mussel-Inspired Polydopamine Coatings.” Journal of Membran Science 417–418.

Ding, An dkk. 2021. “Evaluations of Holey Graphene Oxide Modified Ultrafiltration Membran and the Performance for Water Purification.” Chemosphere 285.

Eduok, Ubong, Heloisa Camara, Amira Abdelrasoul, and Ahmed Shoker. 2022. “Influence of UV-Irradiation Intensity and Exposure Duration on the Hemobiocompatibility Enhancement of a Novel Synthesized Phosphobetaine Zwitterions Polyethersulfone Clinical Hemodialysis Membrans.” Journal of Biomedical Materials Research - Part B Applied Biomaterials 110(3).

Fathanah, Umi, and Hesti Meilina. 2021. “Karakterisasi Dan Kinerja Membran Polyethersulfone Termodifikasi Aditif Anorganik Secara Blending Polimer.” Jurnal Serambi Engineering 6(4).

Ganj, Mohammad dkk. 2019. “Surface Modification of Polysulfone Ultrafiltration Membrans by Free Radical Graft Polymerization of Acrylic Acid Using Response Surface Methodology.” Journal of Polymer Research 26(9).

Gao, Chunmei dkk. 2021. “Preparing Hydrophilic and Antifouling Polyethersulfone Membran with Metal-Polyphenol Networks Based on Reverse Thermally Induced Phase Separation Method.” Surfaces and Interfaces 25.

Irwan, Ginting Suka dkk. 2005. “Photografting of N-Isopropylacrylamide and Glycidyl Methacrylate Binary Monomers on Polyethylene Film: Effect of Mixed Solvent Consisting of Water and Organic Solvent.” Journal of Applied Polymer Science 97(6).

Kaeselev, Bozena, John Pieracci, and Georges Belfort. 2001. “Photoinduced Grafting of Ultrafiltration Membrans: Comparison of Poly(Ether Sulfone) and Poly(Sulfone).” Journal of Membran Science 194(2).

Kull, Kristen R., Michelle L. Steen, and Ellen R. Fisher. 2005. “Surface Modification with Nitrogen-Containing Plasmas to Produce Hydrophilic, Low-Fouling Membrans.” Journal of Membran Science 246(2).

Kusworo, Tutuk D., Nita Aryanti, Enny Nurmalasari, and Dani Puji Utomo. 2020. “Surface Modification of PES-Nano ZnO Membran for Enhanced Performance in Rubber Wastewater Treatment.” In AIP Conference Proceedings,.

Kusworo, Tutuk Djoko dkk. 2017. “ENHANCED ANTI-FOULING BEHAVIOR AND PERFORMANCES OF NANO HYBRID PES-SIO2 AND PES-ZNO MEMBRANS FOR PRODUCED WATER TREATMENT.” Jurnal Teknologi.

Kusworo, Tutuk Djoko, Nita Ariyanti, and Dani Puji Utomo. 2020. “Effect of Nano-TiO2 Loading in Polysulfone Membrans on the Removal of Pollutant Following Natural-Rubber Wastewater Treatment.” Journal of Water Process Engineering 35.

Kusworo, Tutuk Djoko, Nita Aryanti, Dani Puji Utomo, and Enny Nurmala. 2021. “Performance Evaluation of PES-ZnO Nanohybrid Using a Combination of UV Irradiation and Cross-Linking for Wastewater Treatment of the Rubber Industry to Clean Water.” Journal of Membran Science and Research 7(1).

Li, Fang dkk. 2014. “Surface Modification of PES Ultrafiltration Membran by Polydopamine Coating and Poly(Ethylene Glycol) Grafting: Morphology, Stability, and Anti-Fouling.” Desalination 344.

Luo, Ming Liang, Jian Qing Zhao, Wu Tang, and Chun Sheng Pu. 2005. “Hydrophilic Modification of Poly(Ether Sulfone) Ultrafiltration Membran Surface by Self-Assembly of TiO 2 Nanoparticles.” Applied Surface Science 249(1–4): 76–84.

Ma, Xiaole dkk. 2007. “Enhancing the Antifouling Property of Polyethersulfone Ultrafiltration Membrans through Surface Adsorption-Crosslinking of Poly(Vinyl Alcohol).” Journal of Membran Science 300(1–2): 71–78.

Marques, Ingrid R. dkk. 2021. “Simple Approach for the Plasma Treatment of Polymeric Membrans and Investigation of the Aging Effect.” Journal of Applied Polymer Science 138(24).

Mendez, Lara dkk. 2013. “Enhancing Methane Production of Chlorella Vulgaris via Thermochemical Pretreatments.” Bioresource Technology 149: 136–41. http://dx.doi.org/10.1016/j.biortech.2013.08.136.

Mohd Hidzir, Norsyahidah dkk. 2013. “Argon Plasma Treatment-Induced Grafting of Acrylic Acid onto Expanded Poly(Tetrafluoroethylene) Membrans.” Polymer 54(24).

Mu, Li Jun, and Wen Zhen Zhao. 2009. “Hydrophilic Modification of Polyethersulfone Porous Membrans via a Thermal-Induced Surface Crosslinking Approach.” Applied Surface Science 255(16).

Nady, Norhan dkk. 2011. “Modification Methods for Poly(Arylsulfone) Membrans: A Mini-Review Focusing on Surface Modification.” Desalination 275(1–3): 1–9.

Nasrollahi, Nazanin, Vahid Vatanpour, Soheil Aber, and Niyaz Mohammad Mahmoodi. 2018. “Preparation and Characterization of a Novel Polyethersulfone (PES) Ultrafiltration Membran Modified with a CuO/ZnO Nanocomposite to Improve Permeability and Antifouling Properties.” Separation and Purification Technology 192.

Pal, Srimanta, Sobhendu Kumar Ghatak, Sirshendu De, and Sunando DasGupta. 2008. “Characterization of CO2 Plasma Treated Polymeric Membrans and Quantification of Flux Enhancement.” Journal of Membran Science 323(1).

Pandiyaraj, K. Navaneetha, V. Selvarajan, R. R. Deshmukh, and Changyou Gao. 2009. “Modification of Surface Properties of Polypropylene (PP) Film Using DC Glow Discharge Air Plasma.” Applied Surface Science 255(7).

Pieracci, John, David W. Wood, James V. Crivello, and Georges Belfort. 2000. “UV-Assisted Graft Polymerization of N-Vinyl-2-Pyrrolidinone onto Poly(Ether Sulfone) Ultrafiltration Membrans: Comparison of Dip versus Immersion Modification Techniques.” Chemistry of Materials 12(8).

Pöhler, Tiina dkk. 2022. “Pilot-Scale Modification of Polyethersulfone Membran with a Size and Charge Selective Nanocellulose Layer.” Separation and Purification Technology 285.

Prihandana, Gunawan S. dkk. 2013. “Antithrombogenicity of Fluorinated Diamond-like Carbon Films Coated Nano Porous Polyethersulfone (PES) Membran.” Materials 6(10).

Rahimpour, A., S. S. Madaeni, and S. Mehdipour-Ataei. 2008. “Synthesis of a Novel Poly(Amide-Imide) (PAI) and Preparation and Characterization of PAI Blended Polyethersulfone (PES) Membrans.” Journal of Membran Science 311(1–2).

Rahimpour, A., S. S. Madaeni, A. H. Taheri, and Y. Mansourpanah. 2008. “Coupling TiO2 Nanoparticles with UV Irradiation for Modification of Polyethersulfone Ultrafiltration Membrans.” Journal of Membran Science 313(1–2): 158–69.

Rahimpour, Ahmad. 2011. “UV Photo-Grafting of Hydrophilic Monomers onto the Surface of Nano-Porous PES Membrans for Improving Surface Properties.” Desalination 265(1–3).

Ratman, Iwan dkk. 2020. “Petroleum Refinery Wastewater Treatment Using Three Steps Modified Nanohybrid Membran Coupled with Ozonation as Integrated Pre-Treatment.” Journal of Environmental Chemical Engineering 8(4).

Reddy, A. V.R. dkk. 2005. “Fouling Resistant Membrans in Desalination and Water Recovery.” Desalination 183(1–3).

Shamaei, Laleh, Behnam Khorshidi, Muhammad Amirul Islam, and Mohtada Sadrzadeh. 2020. “Industrial Waste Lignin as an Antifouling Coating for the Treatment of Oily Wastewater: Creating Wealth from Waste.” Journal of Cleaner Production 256.

Shoja, M., K. Shameli, M. B. Ahmad, and K. Kalantari. 2015. “Preparation, Characterization and Antibacterial Properties of Polycaprolactone/ZnO Microcomposites.” Digest Journal of Nanomaterials and Biostructures 10(1): 169–78.

Sotto, Arcadio dkk. 2011. “Doping of Polyethersulfone Nanofiltration Membrans: Antifouling Effect Observed at Ultralow Concentrations of TiO2 Nanoparticles.” Journal of Materials Chemistry 21(28).

Suresh, Deepa, Pei Sean Goh, Ahmad Fauzi Ismail, and Nidal Hilal. 2021. “Surface Design of Liquid Separation Membran through Graft Polymerization: A State of the Art Review.” Membrans 11(11).

Susanto, Heru, Malini Balakrishnan, and Mathias Ulbricht. 2007. “Via Surface Functionalization by Photograft Copolymerization to Low-Fouling Polyethersulfone-Based Ultrafiltration Membrans.” Journal of Membran Science 288(1–2).

Ulbricht, Mathias. 2006. “Advanced Functional Polymer Membrans.” Polymer 47(7).

Upadhyaya, Lakshmeesha, Xianghong Qian, and S. Ranil Wickramasinghe. 2018. “Chemical Modification of Membran Surface — Overview.” Current Opinion in Chemical Engineering 20.

Wang, Shuguang dkk. 2020. “Surface-Grafting Polymers: From Chemistry to Organic Electronics.” Materials Chemistry Frontiers 4(3).

Wang, Wei dkk. 2021. “Fabrication of an Antifouling GO-TiO2/PES Ultrafiltration Membran.” Journal of Applied Polymer Science 138(39).

Wang, Yan Qiang dkk. 2006. “Protein-Adsorption-Resistance and Permeation Property of Polyethersulfone and Soybean Phosphatidylcholine Blend Ultrafiltration Membrans.” Journal of Membran Science 270(1–2).

Wavhal, Dattatray S., and Ellen R. Fisher. 2003. “Membran Surface Modification by Plasma-Induced Polymerization of Acrylamide for Improved Surface Properties and Reduced Protein Fouling.” Langmuir 19(1).

Zhang, Peng, and Ru Li. 2022. “Preparation and Performance of Acrylic Acid Grafted PES Ultrafiltration Membran via Plasma Surface Activation.” High Performance Polymers 34(10).




DOI: https://doi.org/10.31315/e.v20i2.9596

Refbacks

  • There are currently no refbacks.

Article Metrics

Metrics Loading ...

Metrics powered by PLOS ALM


Eksergi p-ISSN  1410-394X, e-ISSN 2460-8203,  is published by "Prodi Teknik Kimia UPN Veteran Yogyakarta".

Contact  Jl. SWK 104 (Lingkar Utara) Condong catur Sleman Yogyakarta

 

 Creative Commons License

Eksergi by http://jurnal.upnyk.ac.id/index.php/eksergi/index/ is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

 

 

Lihat Statistik Jurnal Kami