Redesigning Cold Heading Dies with FMEA and DFM Methods in PT. ZYX
Abstract
PT. ZYX is a foreign company automotive component sector for four-wheeled vehicles. In their third year of mass production, the production capacity reached 116 million pcs, resulting in the high cost of Dies purchase for Cold Heading machines. This condition worsened because things such as Dies having a low lifetime and the lead time for Dies purchasement is in the range of 20-40 days or more, which has the potential to cause machine downtime. This study aims to redesign the Dies of Cold Heading machine used today. Completion of the design uses the Pareto diagram analysis, FMEA, and DFM. The analysis result using the FMEA method shows the highest RPN value of 336 with the potential for insert carbide failure that cracks during assembly. The recommended corrective action is to make assembly support components, namely pokayoke parts, and make work instructions for replacing carbide inserts on Dies. The analysis results using the DFM method shows a change in term of cost. The cost for 1 unit of Dies purchasement was initially Rp. 10,247,113.00, but it dwindles to Rp. 4,623,914.23. Using the redesign to make case dies, lock nuts, collets, and stoppers components, resulted in cost efficiency of 54.87%.
Keywords
Full Text:
PDF (Bahasa Indonesia)References
AIAG. (2019). AIAD & VDA FMEA Handbook (Vol. 1st).
Budi Puspitasari, N., Padma Arianie, G., & Adi Wicaksono, P. (2017). Analisis Identifikasi Masalah Dengan Menggunakan Metode Failure Mode and Effect Analysis (FMEA) Dan Risk Priority Number (RPN) PADA SUB ASSEMBLY LINE (Studi Kasus : PT. Toyota Motor Manufacturing Indonesia). In Jurnal Teknik Industri (Vol. 12, Issue 2).
Ferdiansyah, M. F., Rusindiyanto, ), Rahmawati, N., Program, ), & Industri, S.T. (2020). Perancangan Alat Pemberi Makan Ikan Otomatis Bagi Peternak Ikan Ditambak Dengan Metode Design For Manufacturing And Assembly (DFMA). In Tekmapro : Journal of Industrial Engineering and Management (Vol. 15, Issue 01).
Hein, P. H., Voris, N., Dai, J., & Morkos, B. W. (2018). Identifying Failure Modes and Effects Through Design for Assembly Analysis.https://proceedings.asmedigitalco llection.asme.org
Humairas Hadi Purba. (2018). Inovasi Nilai Pelanggan Dalam Perencanaan dan Pengembangan Produk (I). Graha Ilmu.
Irfian Situngkir, D., Gultom, G., & S Tambunan,
D. R. (2019). Pengaplikasian FMEA untuk Mendukung Pemilihan Strategi Pemeliharaan pada Paper Machine (Issue 2). http://jurnal.untirta.ac.id/index.php/jwl
Luqyana, D., Ibnu Ilham, M., Difa Symaidzar, R., Yoslin Raissa, Z., Sjahrul Annas, dan M., Kyai Tapa, J., & Barat Abstrak, J. (2019). Analisis Desain Produk dengan Metode DFMA untuk Talenan Berpemotong. Prosiding Seminar Nasional Teknik Mesin Politeknik Negeri Jakarta, 1080–1084. http://semnas.mesin.pnj.ac.id
McDermott, R. E., Mikulak, R. J., & Beauregard, M. R. (2009). The Basics of FMEA (2nd Edition). CRC Press.
Montgomery, D. C. (2010). Introduction to Statistical Quality Control 7th Edtition. 7th.
Prabowo, R., & Zoelangga, M. I. (2019). Pengembangan Produk Power Charger Portable dengan Menggunakan Metode Quality Function Deployment (QFD). Jurnal Rekayasa Sistem Industri, 8(1), 55– 62.https://doi.org/10.26593/jrsi.v8i1.3187. 55-62
Tarigan, U. (n.d.). Pendekatan Metode DFMA (Design for Manufacture and Assembly) Pada Perancangan Produk Matras. https://doi.org/10.32734/ee.v3i2.1041
Ulrich, K. T., & Eppinger, S. D. (2015). Perancangan Pengembangan Produk. Mc- Graw Hill Book Co.
Volotinen, J., & Lohtander, M. (2018). The re- design of the ventilation unit with DFMA aspects: Case study in Finnish industry. Procedia Manufacturing, 25, 557–564. https://doi.org/10.1016/j.promfg.2018.06. 117
Xin, T. J., Farizuan, R. M., Radhwan, H., Shayfull, Z., & Fathullah, M. (2019). Redesign of drone remote control using design for manufacturing and assembly (DFMA) method. AIP Conference Proceedings, 2129.
https://doi.org/10.1063/1.5118167
Yamin Lubis, S., & Jeffrey, dan. (n.d.). Redesain Kontruksi Meja Laser Marking Menggunakan Metode Design For Manufacture And Assembly (DFMA).
DOI: https://doi.org/10.31315/opsi.v15i2.7635
Refbacks
- There are currently no refbacks.
Sekretariat :
Jurusan Teknik Industri
FTI UPN "Veteran" Yogyakarta
d.a Jalan Babarsari 2 Tambakbayan Yogyakarta 55281
Telp. (0274) 486256
Website http://jurnal.upnyk.ac.id/index.php/opsi
email : jurnal.opsi@upnyk.ac.id
indexed by:
This work is Licensed Under a Creative Commons Attribution 4.0 International license.
View My Stats